Class IV hitches are very similar to Class III hitches except for the weight ratings.
Class IV hitches are Weight Carrying (WC) and Weight Distributing (WD) hitches depending on the vehicle and hitch specifications. Not all Class IV hitches are rated to be both. The hitch specifications will alert you to a hitch that is not weight distributing.
Class IV Ultra Frame Receivers from Draw-Tite have a Weight Carrying rating up to 16,000 lbs. Gross Trailer Weight (WCGTW) with a maximum trailer Tongue Weight (WCTW) of 1,950 lbs. depending on the model. Ultra Frames that are used for Weight Distributing are rated up to 16,000 lbs. Weight Distributing Gross Trailer Weight (WDGTW) with a maximum trailer Weight Distributing Tongue Weight (WDTW) of 1,600 lbs. depending on the model. See Product Specifications below for the exact rating of your particular hitch.
This style of hitch typically uses a 2" square receiver opening. The use of a ball mount and hitch ball of the same rating or higher is required to achieve maximum towing capacity. To use the weight distribution side of the hitch a weight distribution system is required.
Class IV hitches attach to the vehicle frame only.
Always consult your owner's manual for vehicle rating.
Help determining Gross Trailer Weight & Tongue Weight
- Installation Time: 60 Minutes
- Uses all existing holes, No Drilling required
- Ultra Frame ball mount must be used to achieve maximum weight carrying rating.
- Requires temporary removal of bumper during installation.
- Fits all models with standard bumpers.
- Under vehicle spare tire stowage is retained.
- Requires removal of factory hitch if equipped.
Specs
| Hitch Class | Class IV |
| Receiver Size | 2 inch |
| GTW | 15,000 lbs |
| TW | 1,700 lbs |
| Installation Instructions | CLICK HERE |
| WDGTW | 17,000 lbs |
| WDTW | 1,700 lbs |
Features
- Limited Lifetime Warranty!
- A-Coat Base w/ Black Powder Coat Finish"
- Solid All-Welded Construction for Maximum Strength and Safety
Included:
- Mounting Hardware & Instructions
Draw-Tite
Over fifty years and millions of trailer hitches later, our 500 dedicated employees put the same care and patience into every hitch we build today as Bill Whichello did fifty years ago. We also make use of technologically advanced equipment and the most experience in the industry to meet the challenges of tow vehicles.
The basis of our continued success is that our trailer hitches are custom fit for each vehicle. This makes them easy to install. A dealer simply bolts one piece, welded trailer hitches to the vehicle frame. Most installations take 30 minutes or less.
Our trailer hitches are covered by a Nationwide/lifetime limited warranty. We have over 10,000 dealers throughout North America. So wherever you live or travel, there is always a knowledgeable and helpful Draw-Tite dealer nearby. This is especially important when you consider nearly 100% of our consumers use their trailer hitch to tow outside of their local area.
The above information has been provided by the Manufacturer, and we cannot guarantee the accuracy thereof or endorse the opinions expressed.
Details
Details
Print this page
Email this page
