Class IV Custom Fit Trailer Hitch Receiver Draw-Tite
(Draw-Tite Part #: 75420)
This is a custom fit product, please verify fit before ordering:
Change selected vehicle
In Stock - Ready to ship today!

This item is eligible for free shipping. Details

$737.95
$327.59 You Save $410.36!

Quantity

Class IV hitches are very similar to Class III hitches except for the weight ratings.

Class IV hitches are Weight Carrying (WC) and Weight Distributing (WD) hitches depending on the vehicle and hitch specifications. Not all Class IV hitches are rated to be both. The hitch specifications will alert you to a hitch that is not weight distributing.

Class IV hitches used as Weight Carrying are rated up to 10,000 lbs. Gross Trailer Weight (WCGTW) with a maximum trailer Tongue Weight (WCTW) of 1,000 lbs. Hitches that are used for weight distributing are rated up to 14,000 lbs. Weight Distributing Gross Trailer Weight (WDGTW) with a maximum trailer Weight Distributing Tongue Weight (WDTW) of 1,400 lbs.

This style of hitch typically uses a 2" square receiver opening. The use of a ball mount and hitch ball of the same rating or higher is required for weight carrying. To use the weight distribution side of the hitch a weight distribution system is required.

Class IV hitches attach to the vehicle frame only.

Always consult your owner's manual for vehicle rating.

Help determining Gross Trailer Weight & Tongue Weight

  • Installation Time: 25 Minutes
  • Will not fit if vehicle is equipped with a factory installed hitch

Specs

Hitch ClassClass IV
Receiver Size2 inch
GTW6,000 lbs
TW600 lbs
Installation InstructionsCLICK HERE
WDGTW10,000 lbs
WDTW1,000 lbs

Features

  • Limited Lifetime Warranty!
  • Equivalent to Reese 44536 and Hidden Hitch 82534

Included:

  • Mounting Hardware & Instructions

Not Included:

Installation Instructions CLICK HERE

Draw-Tite

Over fifty years and millions of trailer hitches later, our 500 dedicated employees put the same care and patience into every hitch we build today as Bill Whichello did fifty years ago. We also make use of technologically advanced equipment and the most experience in the industry to meet the challenges of tow vehicles.

The basis of our continued success is that our trailer hitches are custom fit for each vehicle. This makes them easy to install. A dealer simply bolts one piece, welded trailer hitches to the vehicle frame. Most installations take 30 minutes or less.

Our trailer hitches are covered by a Nationwide/lifetime limited warranty. We have over 10,000 dealers throughout North America. So wherever you live or travel, there is always a knowledgeable and helpful Draw-Tite dealer nearby. This is especially important when you consider nearly 100% of our consumers use their trailer hitch to tow outside of their local area.

The above information has been provided by the Manufacturer, and we cannot guarantee the accuracy thereof or endorse the opinions expressed.

2003DodgeRam 1500Built After 11/2002
2003DodgeRam 2500
2003DodgeRam 3500
2004DodgeRam 1500Except Daytona/Hemi Sport Quad Cab/Rumble Bee/SRT-10
2004DodgeRam 2500
2004DodgeRam 3500
2005DodgeRam 1500Except Daytona/Hemi Sport Quad Cab/Rumble Bee/SRT-10
2005DodgeRam 2500
2005DodgeRam 3500
2006DodgeRam 1500
2006DodgeRam 2500
2006DodgeRam 3500
2007DodgeRam 1500
2007DodgeRam 2500
2007DodgeRam 3500
2008DodgeRam 1500
2008DodgeRam 2500
2008DodgeRam 3500
2009DodgeRam 2500
2009DodgeRam 3500